The only thing left to do is to press the Start button at the top left of the recovery tool program and then wait patiently for it to complete. Now, we can just launch the recovery tool with Administrator access granted (the MSMDownloadTool.exe file) and you should see the OnePlus 5 recognized in one of your COM ports here. If you’re having driver issues, it will be listed under Unknown Devices or something similar but if you’re good to go then you should see a device labeled Qualcomm 9008 listed under the COMs and Ports section. Once the USB cable is plugged in, continue holding the Volume Up button for a few seconds until you see a new device added to the Windows Device Manager. Just know that the cable could be the cause if you’re running into some sort of trouble.
Some recommend using the stock USB cable but it worked just fine on my Anker cable. The goal is to get your OnePlus 5 to look like this while in this special boot mode. This simply involves having USB drivers from OnePlus installed so even that shouldn’t be very difficult. The most difficult part will likely involve getting Windows to disable Driver Signature Enforcement and/or getting the OnePlus 5 to show up properly in the Device Manager. Wait for the OnePlus 5 to boot back into OxygenOSįor those who are familiar with the unbrick process for OnePlus devices, this will feel right at home as it is essentially the same as the OnePlus 3 and OnePlus 3T.Unplug the OnePlus 5 from the PC after the phone reboots by itself.Wait until the process completes (you should see green text).Then click the Start button in the top left corner to begin the process.Grant Administrator access so it can be opened.Click on the Run As Administrator option.
Disable Driver Signature Enforcement in Windows (Method 2).This will help you to accept OTA updates, reset the device before selling it, and more.
0 kommentar(er)
